The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.
The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Stylish Wood Turntable
A stunning addition to any system, the AT-LPW30TK features an anti-resonance plinth with simulated teak wood veneer to limit low-frequency acoustic feedback.
The LPW30TK was designed to give you optimal high-fidelity audio reproduction from vinyl, with sophisticated styling.
Over 55 Years of Analog Excellence
We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Fully manual operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Type Belt-drive manual turntable Motor DC servo Drive Method Belt drive Speeds 33-1/3 RPM, 45 RPM Turntable Platter Die-cast aluminum Wow and Flutter < 0.15% WRMS (33 RPM) at 3 kHz Signal-to-Noise Ratio >60dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 35 dB nominal, RIAA equalized Power Supply Requirements 100-240V AC, 50/60 Hz, 0.5 A Max. Dimensions 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H Weight 3.90 kg (8.60 lbs.) without dust cover Accessories Included Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9')) (AD-SA1205WE), Dust cover hinges Notes Tonearm type: Static balanced straight aluminum pipe tonearm Effective arm length: 223.6 mm Overhang: 18.6 mm Tracking error angle: <2 degrees Applicable cartridge weight: 12-17 g Stylus pressure adjustment range: 0-3 g AC adapter: 12 V, 0.5 A Replacement Stylus: AT-VMN95C